InfiniBracket™ 2-Tier Stainless Steel Corner Sleeper Bracket with Stake

InfiniBracket™ 2-Tier Stainless Steel Corner Sleeper Bracket

These Stainless Steel, 2-Tier Corner Railway Sleeper Bracket are a quick and easy system for mounting railway sleepers as driveway or pathway edging, straight edge, building raised beds and planters, securing retaining walls and border edging, and many other simple constructions. Stainless Steel brackets are the best choice for use with Oak Sleepers due to their resistance to the acidity of oak wood.

Specifically, our 2-Tier brackets are suitable for use in constructions where sleepers will be stacked on top of one another to make taller raised beds or path edging. The extended plate on the top allows for 8 screws to be used to secure the bracket.

Our InfiniBracket collection is crafted from Stainless Steel and is built to stand the test of time against the elements. Rain, saltwater, wear and tear, none of these will cause the bracket to falter.

To install, you must simply bang the stake into the ground where the sleeper is to be installed, we recommend a rubber mallet for this, then just screw the bracket onto the timber sleepers. As this is a 2-Tier Bracket, you must secure the bracket to both timber railway sleepers This installation is both simple and incredibly secure.

All InfiniBracket Stainless Steel railway sleeper brackets are all covered by a durability promise, we use these products ourselves and stand by their quality.

Can be used for:

• Raised Planters & Flower Beds
• Drive & pathway edging
• Retaining walls
• Decorative wood items
• Oak Railway Sleeper projects

Key features:

• Corner brackets made from British Grade 304 Marine Grade Stainless Steel for ultimate rust resistance.
• Suitable for installation on internal corners.
  
• It will last a lifetime of exposure to rain and other weather.
• It will last a lifetime of exposure to rain and other weather.
• The bracket contains 7.5mm holes.
• Manufactured and designed in the United Kingdom.
• Features a clean 90° bend for perfect corners every time.
• 8 holes on the bracket, 7.5mm in diameter, with 4 on either side of the bend.
• Simple and quick to install - simply bang into the ground and then screw the plate to the sleepers
• Suits many different outdoors projects including Raised Beds, Pathway and Driveway Edging, Retaining Walls and Garden Steps.
• Works with all sizes of wooden sleeper
• 
  

Dimensions:

• Total Height: 680mm
• Mounting Plate Height: 350mm
• Depth: 65mm
• Width: 65mm

Installation Tips:

• We recommend using a rubber mallet to drive these into the ground to protect the steel.
• If using a wooden hammer or a fibreglass hammer, please strike a small piece of wood above the stake to protect the steel.

Please note:

• Due to the nature of Stainless Steel, some surface scratches may be present on the brackets, this does not affect the quality of performance though.
• Whilst the product is called "2-Tier", you will only receive a single bracket.